Rotronic Data Loggers for Humidity, Temperature, Pressure & Dew Point
Buy Rotronic Data Loggers here
In temperature and humidity monitoring, the problem usually starts after the damage is already done. A pharma shipment crosses the allowed temperature limit. A storage room becomes too humid. A museum display area silently develops moisture issues. A warehouse team realizes too late that nobody has recorded the actual environmental condition.
This is where a Rotronic data logger becomes useful. It records environmental parameters such as humidity, temperature, pressure and dew point so that quality teams, logistics teams and maintenance teams can check what actually happened over time.
For buyers, the main question is not simply “Which data logger is available?” The better question is:
Which Rotronic data logger matches my monitoring requirements — humidity, temperature, pressure, dew point, storage capacity, accuracy and application?
Radical TechMart offers these Rotronic data logger models:
- Rotronic HL-1D Humidity and Temperature Data Logger
- Rotronic BL-1D Ambient Pressure and Dew Point Humidity Data Logger
- Rotronic TL-1D Compact Data Logger
- Rotronic HL-20D Humidity and Temperature Data Logger
Let’s understand where each model fits.
What is a Rotronic Data Logger?
A Rotronic data logger is a compact monitoring device used to record environmental data over time. Depending on the model, it can record:
- Relative humidity
- Temperature
- Pressure
- Dew point
The recorded data helps users verify storage conditions, transportation conditions, building environments, pharma compliance, and process monitoring requirements.
The HL-1D / BL-1D / TL-1D catalogue mentions that these models are suitable for logistics, pharmaceuticals and pharmacies, and support logging intervals from 30 seconds to 24 hours with 32,000 lines storage capacity.
The HL-20D catalogue positions the model for logistics, production and storage, buildings and museums, with humidity and temperature recording and a memory capacity of 20,000 value pairs.
Why Correct Data Logger Selection Matters
Many buyers select a data logger only by price or brand name. That can create problems later.
For example:
- A temperature-only logger will not help if humidity is the actual problem.
- A humidity logger without pressure monitoring may not suit applications where ambient pressure is important.
- A logger with lower accuracy may not be suitable for sensitive storage.
- A logger without enough memory may not be suitable for long monitoring periods.
- A model selected without checking software compatibility may create reporting issues.
In actual plant, warehouse, pharma and logistics conditions, the right data logger should be selected based on:
- Parameter to be measured
- Accuracy requirement
- Storage capacity
- Logging interval
- Software/reporting requirement
- Environmental protection
- Application type
- Calibration and certificate requirement
1. Rotronic HL-1D Humidity and Temperature Data Logger
The Rotronic HL-1D is suitable when the buyer needs to monitor both relative humidity and temperature in a compact logger format. It is a practical choice for storage, pharma, logistics, and controlled indoor spaces where both temperature and humidity affect product quality.
Technical points to note:
- Measures humidity and temperature
- Humidity range: 0 to 100 %rh, non-condensing
- Temperature range: -30 to 70 °C
- Storage capacity: 32,000 lines
- Logging interval: 30 seconds to 24 hours
- LCD display with 2 lines
- USB-Mini communication
- IP67 protection class
- Battery: 1 Ă— CR2
- Certified to EN 12830
- FDA 21 CFR Part 11 / GAMP 5-compliant HW4 software support mentioned in the catalogue
Where it is commonly used:
- Pharma storage
- Medicine shops and pharmacies
- Cold-chain logistics
- Warehouses
- Packaging areas
- Controlled indoor storage rooms
2. Rotronic BL-1D Ambient Pressure and Dew Point Humidity Data Logger
The Rotronic BL-1D is the right choice when the application requires more than basic humidity and temperature logging. It records process pressure, dew point, humidity and temperature, making it useful for applications where environmental condition analysis is more detailed.
Technical points to note:
- Measures pressure, dew point, humidity and temperature
- Pressure measurement method: Bosch BMP280
- Pressure range: 300 to 1100 hPa
- Pressure accuracy: ±3 hPa at 0 to 65 °C / ±5 hPa others
- Dew point calculated from humidity and temperature
- Humidity range: 0 to 100 % RH, non-condensing
- Temperature range: -30 to 70 °C
- Storage capacity: 32,000 lines
- USB-Mini communication
- IP67 protection class
- HW4 software support mentioned in the catalogue
Where it is commonly used:
- Pharma monitoring
- Laboratory environments
- Storage areas where condensation risk matters
- Ambient pressure monitoring
- Controlled rooms
- Quality monitoring applications
3. Rotronic TL-1D Compact Data Logger
The Rotronic TL-1D is suitable when the main requirement is temperature logging in a compact device. It is a good option when humidity or pressure measurement is not required and the buyer wants simple temperature monitoring with good storage capacity.
Technical points to note:
- Temperature data logger
- Temperature range: -30 to 70 °C
- Temperature measurement method: NTC
- Temperature accuracy: ±0.3 K at -30 to 70 °C / ±0.5 K others
- Resolution: 0.1 °C
- Storage capacity: 32,000 lines
- Logging interval: 30 seconds to 24 hours
- LCD display with 2 lines
- USB-Mini communication
- IP67 protection class
- Battery life mentioned as 1 year at 1 hour logging interval and room temperature
Where it is commonly used:
- Cold storage temperature checks
- Pharma temperature records
- Transport temperature monitoring
- Pharmacy storage
- Warehouse temperature logging
- General temperature audits
4. Rotronic HL-20D Humidity and Temperature Data Logger
The Rotronic HL-20D is a higher-accuracy humidity and temperature data logger suitable for users who need strong measurement performance and long-term stability.
Technical points to note:
- Humidity and temperature data logger with internal sensors
- Humidity measurement method: ROTRONIC HYGROMER® IN-1
- Humidity range: 0 to 100 %rh, non-condensing
- Temperature measurement method: PT100 RTD, IEC 751 Class A
- Temperature range: 0 to 50 °C
- Recording capacity: 20,000 value pairs
- Recorded parameters: relative humidity and temperature
- Logging interval: minimum 5 seconds up to 1 hour
- Battery: 3 Ă— AA alkaline
- Display: LC display with alarm and low-battery indication
- Dimensions: 130 Ă— 72 Ă— 32 mm
- IP protection: IP40
- Order codes: HL-20D and HL-20D-SET1 with AC3006 service cable
Where it is commonly used:
- Logistics
- Production and storage
- Buildings
- Museums
- Display and test applications
- Humidity-sensitive storage areas
Quick Comparison Table
| Model | Measures | Best Use |
|---|---|---|
| Rotronic HL-1D | Humidity + Temperature | Compact humidity and temperature monitoring |
| Rotronic BL-1D | Pressure + Dew Point + Humidity + Temperature | Detailed environmental monitoring |
| Rotronic TL-1D | Temperature | Temperature-only logging |
| Rotronic HL-20D | Humidity + Temperature | Higher-accuracy humidity and temperature monitoring |
How to Choose the Right Rotronic Data Logger
Choose HL-1D if:
You need a compact humidity and temperature logger for pharma, logistics, pharmacies or storage.
Choose BL-1D if:
You need humidity, temperature, ambient pressure and dew point in one logger.
Choose TL-1D if:
You only need temperature logging and do not require humidity or pressure.
Choose HL-20D if:
You need better humidity accuracy, long-term stability and a larger display-style humidity-temperature logger.
Common Mistakes to Avoid Before Buying a Data Logger
| Do This | Not This |
|---|---|
| Select based on measured parameter | Do not buy temperature-only logger if humidity is important |
| Check storage capacity | Do not ignore logging duration |
| Confirm accuracy requirement | Do not select only by price |
| Check IP rating | Do not use indoor models in harsh environments |
| Confirm software/reporting needs | Do not assume every logger gives compliance-ready reports |
| Check calibration/certificate requirement | Do not wait until audit time |
| Confirm operating range | Do not use outside specified conditions |
Quick Selection Checklist
Before purchasing a Rotronic data logger, confirm:
- Do you need temperature only, or humidity also?
- Is dew point monitoring required?
- Is ambient pressure monitoring required?
- What is the required logging interval?
- How many days/months of data need to be stored?
- What accuracy is required for your application?
- Will the logger be used indoors, outdoors, in transport or in storage?
- Is IP67 protection required?
- Is FDA/GMP software compliance important?
- Do you need a calibration certificate or traceable documentation?
Why Buy Rotronic Data Loggers from Radical TechMart?
At Radical TechMart, the focus is not only to supply a data logger, but to help customers select the correct model for their monitoring requirement.
Whether you need a Rotronic humidity data logger, temperature data logger, dew point logger, or pressure and humidity data logger, Radical TechMart can help you compare models based on application, parameter, accuracy, storage capacity and availability.
These products are suitable for:
- Pharma companies
- Logistics and cold-chain users
- Warehouses
- Pharmacies
- Laboratories
- Museums and buildings
- Production and storage facilities
- Quality monitoring teams
Final Thoughts
A data logger is not just a recording device. In many applications, it becomes proof of storage quality, shipment safety, audit compliance and process control.
If your application only needs temperature monitoring, the Rotronic TL-1D may be suitable. If you need humidity and temperature together, choose HL-1D or HL-20D depending on accuracy and installation requirements. If your application also needs pressure and dew point, BL-1D is the better choice.
In industrial and quality-sensitive applications, the right data logger should be selected by understanding the parameter, environment, logging duration, accuracy and reporting requirement — not only by price.
FAQs
1. Which Rotronic data logger is best for humidity and temperature monitoring?
For humidity and temperature monitoring, Rotronic HL-1D and Rotronic HL-20D are suitable options. HL-1D is compact with IP67 protection, while HL-20D offers higher humidity accuracy and strong long-term stability.
2. Which Rotronic data logger measures pressure and dew point?
The Rotronic BL-1D measures process pressure, dew point, humidity and temperature.
3. Which Rotronic data logger is suitable for temperature-only monitoring?
The Rotronic TL-1D is suitable for temperature-only data logging applications.
4. Are Rotronic data loggers suitable for pharma applications?
Yes, the HL-1D / BL-1D / TL-1D catalogue mentions applications such as pharmaceuticals and pharmacies, along with FDA 21 CFR Part 11 / GAMP 5-compliant HW4 software support.
5. What is the storage capacity of Rotronic HL-1D, BL-1D and TL-1D?
The HL-1D / BL-1D / TL-1D series has a storage capacity of 32,000 lines.
6. What is the recording capacity of Rotronic HL-20D?
The Rotronic HL-20D has a recording capacity of 20,000 value pairs for relative humidity and temperature.
7. Which Rotronic data logger should I choose for logistics?
For logistics, HL-1D, TL-1D and HL-20D may be suitable depending on whether you need temperature only or humidity and temperature monitoring. BL-1D is better if pressure and dew point are also required.
