A. Product Overview

The Autonics SLG-320-RYG is a three stack industrial tower signal light from the Autonics SL Series.

It provides Red, Yellow and Green visual indications to communicate different machine or process conditions to operators.

Unlike modern LED tower lights, the SLG-320-RYG uses incandescent lamps with a rotating indication function. The large 86 mm diameter signal sections provide strong visual identification in factories and production environments.

The model operates on 220 VAC and uses a lead wire connection for installation.

Key Features

• Brand: Autonics

• Model: SLG-320-RYG

• Series: SL

• Product type: Industrial tower signal light

• Number of stacks: 3

• Signal colors: Red, Yellow and Green

• Function: Rotating indication

• Power supply: 220 VAC

• Current consumption: Approximately 0.06 A

• Light source: Incandescent bulb

• Bulb specification: 12 V, 5 W

• Tower diameter: 86 mm

• Approximate height: 338.5 mm

• Connection type: Lead wire

• Cable specification: VSF, 0.75 mm

• Mounting: Direct mounting

• Protection rating: IP42

• Operating temperature: Minus 15°C to 40°C

• Storage temperature: Minus 20°C to 70°C

• Operating humidity: 45 to 85 percent RH

• Insulation resistance: 100 megaohm or more

• Vibration resistance: 0.75 mm at 10 to 55 Hz

• Buzzer: No

B. Working Principle

The Autonics SLG-320-RYG tower light provides visual machine status indication through three separately colored signal sections.

Each section can be connected to the machine control circuit according to the required indication logic.

When the relevant electrical signal is applied, the corresponding lamp operates and provides a rotating visual indication.

A typical machine installation may use the colors as follows:

Green: Machine running normally

Yellow: Warning, standby or operator attention required

Red: Machine fault, alarm or stopped condition

The exact meaning assigned to each color depends on the machine design and control logic.

For example, a PLC or relay based control system can activate the Red signal when a machine fault occurs. Once the problem is corrected, the system can turn off the Red signal and activate Green when normal operation resumes.

The large colored tower sections allow operators to identify equipment conditions without standing directly beside the machine.

C. Why Is the Autonics SLG-320-RYG Used?

1. Machine Status Indication

The tower light provides immediate visual information about the operating condition of industrial machinery.

2. Fault Indication

The Red section can be assigned to indicate a machine fault, process alarm or stopped condition.

3. Warning Indication

The Yellow section can indicate warning conditions, waiting status, maintenance requirements or operator attention.

4. Running Indication

The Green section can indicate that machinery is operating normally.

5. Factory Floor Visibility

Its large 86 mm diameter tower design makes the indication easier to identify from different locations around a production area.

6. Production Line Monitoring

Multiple machines can use tower lights so supervisors can quickly identify which equipment is running, waiting or experiencing a fault.

7. Industrial Automation

The signal light can be controlled through compatible PLC outputs, relays or machine control circuits.

8. Visual Alarm Indication

Rotating visual indication draws greater attention than a small panel mounted indicator lamp.

9. Control Panel Applications

The SLG-320-RYG can be mounted on industrial equipment or suitable control enclosures for remote machine status indication.

10. 220 VAC Systems

This model is suitable for applications specifically requiring a 220 VAC tower signal light.

D. Suitable Buyers

The Autonics SLG-320-RYG 3 Stack Red Yellow Green Tower Light is suitable for:

• Industrial automation companies

• Machine manufacturers

• OEM machine builders

• Control panel manufacturers

• PLC system integrators

• Packaging machine manufacturers

• Conveyor manufacturers

• CNC machine manufacturers

• Assembly line manufacturers

• Special purpose machine manufacturers

• Material handling companies

• Production plants

• Factory maintenance departments

• Automotive component manufacturers

• Textile machinery manufacturers

• Food processing machinery manufacturers

• Pharmaceutical machinery manufacturers

• Electrical contractors

• Automation engineers

• Industrial maintenance teams

It is particularly relevant for buyers searching for a 220 VAC tower light, 3 stack signal tower, Red Yellow Green tower light, rotating tower light, machine status indicator or Autonics tower signal light.

FAQ

1. What is the Autonics SLG-320-RYG?

The Autonics SLG-320-RYG is a three stack industrial tower signal light used to visually indicate machine and process status.

2. How many signal sections does the SLG-320-RYG have?

It has three signal sections.

3. What colors are available?

The three colors are:

Red

Yellow

Green

4. What is the power supply of the SLG-320-RYG?

The model operates on 220 VAC.

5. Is the Autonics SLG-320-RYG an LED tower light?

No. The SLG-320-RYG uses incandescent bulbs rather than LED light sources.

6. What bulb specification does it use?

The specified bulb rating is 12 V and 5 W.

7. Does the SLG-320-RYG have a buzzer?

No. This specific model does not include a buzzer.

8. What type of indication does the SLG-320-RYG provide?

It provides a rotating visual indication.

9. What is the diameter of the signal tower?

The tower diameter is approximately 86 mm.

10. What is the approximate height?

The tower is approximately 338.5 mm high.