


Wall Mount Carbon Dioxide (CO2) Gas Sensor and Transmitter | RDCL-CO2W
The RDCL-CO2W Wall Mount CO2 Sensor and Transmitter provides continuous carbon dioxide measurement using NDIR infrared technology. Available with RS485, 4 to 20 mA and voltage outputs, it is ideal for HVAC, building automation, greenhouses, mushroom cultivation and indoor air quality monitoring.
Customize
Share :
A. Product Overview
The RDCL-CO2W measures CO2 in surrounding air and transmits readings to monitoring and control systems. It is designed for permanent installation where reliable CO2 data supports ventilation, agricultural climate control or environmental monitoring.
The instrument uses Non-Dispersive Infrared (NDIR) sensing. Output choices support integration with PLC, SCADA, HVAC and Building Management Systems (BMS). An optional OLED display provides local readings.
Key Features
NDIR infrared sensing for continuous carbon dioxide monitoring.
Measurement range options: 0 to 2000 ppm, 0 to 5000 ppm and 0 to 10000 ppm.
1 ppm measurement resolution and built-in temperature compensation.
RS485, 4 to 20 mA, 0 to 5 V and 0 to 10 V output options.
Optional OLED display for local readings.
Wall mount design for fixed installation.
10 to 30 V DC operating power supply.
Approximately 2-second measurement update interval.
Selected variants can also measure temperature and relative humidity.
Technical Specifications
Parameter | Specification |
Model | RDCL-CO2W |
Product Type | Wall Mount CO2 Sensor and Transmitter |
Measured Gas | Carbon Dioxide (CO2) |
Sensor Principle | NDIR Infrared |
Range Options | 0 to 2000, 0 to 5000 or 0 to 10000 ppm |
Resolution | 1 ppm |
Supply Voltage | 10 to 30 V DC |
Power Consumption | Approximately 0.3 W at 24 V DC |
Output Options | RS485, 4 to 20 mA, 0 to 5 V, 0 to 10 V |
Update Interval | Approximately 2 seconds |
Warm-Up | Approximately 2 minutes for initial readings, up to 10 minutes for stabilization |
Display | Optional OLED |
Mounting | Wall Mount |
Housing | ABS Plastic |
Additional Measurements | Temperature and humidity in selected versions |
Configuration note: The measuring range, output signal, display and additional sensing functions depend on the selected RDCL-CO2W variant. Confirm the exact ordered specification before installation.
B. Working Principle
The RDCL-CO2W uses NDIR sensing. CO2 absorbs infrared radiation at specific wavelengths, allowing the instrument to calculate its concentration.
Step 1: Air sampling
Ambient air reaches the sensor's measurement chamber through the housing opening.
Step 2: Infrared measurement
An internal infrared source sends light through the sampled air. CO2 molecules absorb part of that radiation.
Step 3: Concentration calculation
A detector measures the remaining infrared signal. The electronics calculate CO2 concentration in parts per million (ppm), using compensation to reduce the effect of temperature changes.
Step 4: Signal transmission
The reading is sent through the selected output:
4 to 20 mA: Industrial analog current signal.
RS485: Digital communication to compatible monitoring equipment.
0 to 5 V or 0 to 10 V: Analog voltage signal for compatible controllers.
Step 5: Continuous monitoring
After warm-up, a connected BMS, PLC or ventilation controller can use CO2 readings for displays, trend recording or fresh air control.
C. Why Is a Wall Mount CO2 Sensor Used?
A wall mounted transmitter continuously measures CO2. Elevated indoor CO2 can indicate insufficient ventilation, while agricultural operations use CO2 readings to manage growing conditions.
Major Applications
1. HVAC and Demand-Controlled Ventilation
Supplies CO2 readings to ventilation controllers so fresh air delivery can respond to changing occupancy and indoor conditions.
2. Building Management Systems
Enables centralized CO2 monitoring in offices, commercial buildings, shopping centers and other managed facilities.
3. Greenhouses
Monitors carbon dioxide concentration to support crop cultivation, ventilation management and CO2 enrichment systems.
4. Mushroom Cultivation
Helps monitor CO2 levels in mushroom growing rooms, where appropriate ventilation is essential for cultivation.
5. Poultry and Livestock Facilities
Provides CO2 readings that can support ventilation management in enclosed agricultural buildings.
6. Schools, Offices and Healthcare Buildings
Supports ventilation assessment in classrooms, meeting rooms, waiting areas and other occupied indoor spaces.
7. Industrial Facilities and Laboratories
Provides continuous CO2 measurement for selected production, environmental monitoring and research applications.
Benefits
Continuous monitoring of carbon dioxide concentration.
Better visibility into indoor ventilation performance.
Compatible output options for automation system integration.
Useful for greenhouse and agricultural climate control.
Optional local display and centralized data monitoring.
D. Suitable Buyers
Suitable Buyer | Typical Requirement |
HVAC Contractors | CO2 measurement for ventilation control |
BMS and Building Automation Companies | Integration with building monitoring systems |
Greenhouse Operators | CO2 monitoring for crop growing conditions |
Mushroom Farm Owners | Growing room carbon dioxide monitoring |
Poultry and Livestock Farms | CO2-based ventilation assessment |
Commercial Property Managers | Indoor air quality and ventilation monitoring |
PLC and SCADA System Integrators | Analog or digital CO2 transmitter integration |
Schools and Healthcare Facilities | CO2 monitoring in occupied spaces |
Research Laboratories | Continuous CO2 measurement and trend recording |
Environmental Monitoring Companies | Multi-location CO2 monitoring projects |
Industrial Instrument Distributors | Supply of wall mounted CO2 sensors |
Frequently Asked Questions (FAQs)
1. What is the RDCL-CO2W CO2 sensor?
It is a wall mounted carbon dioxide sensor and transmitter for measuring CO2 in ambient air and sending readings to a compatible monitoring system.
2. What is a wall mount CO2 transmitter used for?
It measures CO2 continuously in applications such as HVAC, building automation, indoor air quality monitoring, greenhouses and agricultural facilities.
3. What measurement ranges are available?
The product family offers 0 to 2000 ppm, 0 to 5000 ppm and 0 to 10000 ppm options. Select the range that matches the application.
4. How does an NDIR CO2 sensor work?
NDIR technology measures how much infrared radiation carbon dioxide absorbs inside a measurement chamber and converts the result into a CO2 reading in ppm.
5. Does RDCL-CO2W have a 4 to 20 mA output?
A 4 to 20 mA version is available for compatible PLCs, process indicators and building controllers. Confirm the output when ordering.
6. Is an RS485 version available?
Yes. RS485 is one of the output options. Verify the exact communication protocol and settings for the selected variant before integration.
7. Can the sensor connect to a PLC or SCADA system?
Yes. A compatible PLC or SCADA system can receive CO2 measurements through the specified analog or digital output interface.
8. Can RDCL-CO2W be used with HVAC and BMS equipment?
Yes. It can supply CO2 readings to compatible HVAC and BMS controllers for monitoring and demand-controlled ventilation.
9. Is the CO2 sensor suitable for greenhouses?
Yes. It can monitor greenhouse CO2 levels for climate control. Select an appropriate measurement range and installation location.
10. Can it be used for mushroom cultivation?
Yes. It can monitor growing room CO2 concentration. Confirm that the selected sensor enclosure is suitable for local humidity and condensation conditions.
11. Does the transmitter include a display?
An optional OLED display is available. Display and non-display configurations should be specified when ordering.


